Balustrades and fencing
Press-locked gratings for fencing or solid balustrades are manufactured from galvanised steel, with a powder-coated finish if required. They are quick to assemble and offer good resistance. Whether in stadiums, factories, airports or by private individuals, press-locked gratings for fencing are used in a variety of different contexts. They are available as press-welded gratings as well as slanted-strut gratings for added privacy.
Grating panels can be connected by posts made from square or flat tubing sealed directly or with prepierced connectors (on request only).
Benefits
Manufacturing principle
Assembly principle
Center distance / Gauges
Most common centre distances :
- BB gauge: 33.33 mm - 44.44 mm - 55.55 mm - 66.66 mm in 25 / 2.
- TB gauge: 33.33 mm - 44.44 mm - 55.55 mm - 66.66 mm - 99.99 mm in 25 / 2.
Please ask us if you have any specific requests.
Traitement
Finishes available:
- Powder-coated
- Galvanized
Custom manufacture
Depending on the layout and dimensions you require, several different meshes and cross-sections can be manufactured. For use as a balustrade, the NF P01-012 (paragraph 2.3.2) standard imposes a maximum horizontal gap in the mesh of 50mm). (Please give details when ordering).
Characteristics
Mesh
- The mesh spacing is defined in accordance with the standards and loads that must be respected:
- For a BB thickness of 2-3 mm:
- The BB spacing is typically a multiple of 11.11.
- The IB spacing is typically a multiple of 11.11.
- For a BB thickness of 4-5 mm:
- The BB spacing is typically a multiple of 18.
- The IB spacing is typically a multiple of 17.
- Other options are available on request.
Bearer bar
- Standard height: 20-150 mm.
- Standard thickness: 2-8 mm.
- Other options are available on request.
Transvers bar
- Spacer: 10 x 2 mm.
- Other options are available on request.
Dimensions
- Maximum length of bearer bars: 4000 mm.
- Maximum length of spacers: 2000 mm.
Material
- S235JR steel as per EN 10025 standards..
- Stainless steel 304 ( 1.4301 ).
- Stainless steel 316 ( 1.4571 ).
- Aluminium AlMg3.
- Other options are available on request.
Surface treatment
- Galvanized in accordance with EN ISO 1461 standards.
- Lacquered in accordance with standard RAL.
- Passivation.
- Anodisation.
- Bituminous paint
- Other options are available on request.
Finish
- Available with 'T' or 'flat' edge.
- Available with single or double notching on request.
- HALF-MOON or SAWTOOTH notching available.
Finished product
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
- Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.
Assembly
JK Technic press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. JK Technic press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.
Step 1 :
BBs and TBs fixed in place
Step 2 :
Press-locking
Step 3 :
Application of banding bars
20 000 customers in Europe, many references.
Browse our gallery of references in industry and architecture.
Discover our gallery